Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Brake Rotor

Courtesy of GENERAL MOTORS CORP.

Remove the front brake rotor. Refer to Brake Rotor Replacement .

Fig 2: View Of Front Wheel Speed Sensor

Courtesy of GENERAL MOTORS CORP.

Disconnect the wheel speed sensor electrical connector, if equipped.

Fig 3: Wheel Speed Sensor Electrical Connector & Connector Bracket

Courtesy of GENERAL MOTORS CORP.

Remove the wheel speed sensor electrical connector form the connector bracket.

Fig 4: Front Wheel Drive Shaft Spindle & Nut

Courtesy of GENERAL MOTORS CORP.

Remove the front wheel drive shaft spindle nut.

Fig 5: View Of Wheel Bearing/Hub Assembly & Mounting Bolts

Courtesy of GENERAL MOTORS CORP.

Support the wheel drive shaft with heavy mechanic's wire or equivalent.
Remove and discard the wheel bearing/hub mounting bolts.
Remove the wheel bearing/hub assembly from the steering knuckle.