LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1814 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Level Indicator and Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Oil Level Indicator Tube
    GM897585Courtesy of GENERAL MOTORS CORP.
  1. Install the oil level indicator tube into the block.
  2. NOTE: Refer to Fastener Notice .
  3. Install the oil level indicator tube bolt to the intake manifold.

    Tighten:  Tighten the oil indicator tube assembly bolt - L61 to 10 N.m (89 lb in).