LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1814 (Engine Mechanical - 2.2L (L61)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Oil Pressure Sensor and/or Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Oil Pressure Switch
    GM897643Courtesy of GENERAL MOTORS CORP.
  1. Turn ignition OFF.
  2. Disconnect engine oil pressure (EOP) switch harness connector.
  3. Remove the EOP switch using the J 35749  . See Special Tools .