Tools Required

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

J 38122-A Crankshaft Balancer Holder. See Special Tools .

Fig 1: View Of Harmonic Balancer Holder J38122-A

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: It may be necessary to remove the chamfer (bevel) from the edge of an 18 mm socket in order to get full socket engagement on the thin headed flywheel bolts.
Do not orientate the flywheel to the crankshaft. It is balanced separately from the engine.

Remove the flywheel attaching bolt. Use the J 38122-A to prevent crankshaft rotation. See Special Tools .

Fig 2: View Of Flywheel

Courtesy of GENERAL MOTORS CORP.

Remove the flywheel retainer.
Remove the flywheel.
Clean the thread adhesive from the flywheel bolt holes. Use a nylon bristle brush to clean the holes in the crankshaft.