LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1813 (Sunroof System) >> Repair Instructions >> Sunroof Motor/Actuator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Sunroof Track Adjustment Distance
    GM987587Courtesy of GENERAL MOTORS CORP.
  1. Manually adjust the track to achieve a distance of (a) 44.5 mm (1.75 in) between the left slide and track bracket.
  2. Manually adjust the track to achieve a distance of (a) 44.5 mm (1.75 in) between the right slide and track bracket.
  3. Install the sunroof motor to the sunroof module.
    4. NOTE: Refer to Fastener Notice .
  4. Install the sunroof motor screws.

    Tighten:  Tighten the screws to 5 N.m (44 lb in).

    5. Fig 2: View Of Sunroof Motor/Actuator
    GM964583Courtesy of GENERAL MOTORS CORP.
  5. Connect the electrical connectors to the sunroof motor.
  6. Secure the electrical harness to the sunroof module.
  7. Verify the sunroof operation.
  8. Install the sunroof window. Refer to Sunroof Window Replacement .
  9. Install the headliner. Refer to Headlining Trim Panel Replacement .
scientia non olet · About LEMON Manuals