LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1808 (Power Door Lock System And Release Systems) >> Repair Instructions >> Door Inside Handle Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Inside Door Handle
    GM943413Courtesy of GENERAL MOTORS CORP.
  1. Remove the inside handle fastener cover.
  2. Remove the screw from the center of the inside handle pocket.
  3. Slide the handle forward and pull outward to expose the lock rods.
  4. Using a thin-bladed tool, disengage the rods from the retaining clips.
  5. If the vehicle is equipped with power windows, disconnect the electrical connector from the switch by depressing the retaining tabs.
scientia non olet · About LEMON Manuals