Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Position the upper and lower shrouds.

Fig 1: View Of Steering Column Upper & Lower Shrouds Panels

Courtesy of GENERAL MOTORS CORP.

Apply light pressure until they snap in place.

Fig 2: Removing & Installing Ignition Lock Cylinder Bezel

Courtesy of GENERAL MOTORS CORP.

Install the ignition switch bezel.

NOTE: Refer to Fastener Notice .

Install the steering column fasteners.
Tighten: Tighten the lower steering column cover screws to 2 N.m (18 lb in).
Enable the SIR system. Refer to SIR Disabling and Enabling .