LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1805 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Liftgate Wedge Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the lift gate.
  2. Remove the rear fascia. Refer to Rear Bumper Fascia Replacement .
    3. Fig 1: Wedge Plate
    GM930906Courtesy of GENERAL MOTORS CORP.
  3. Drill rivets from the wedge plate.
  4. Remove the wedge plate from the vehicle.
scientia non olet · About LEMON Manuals