Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Hood Hinge Replacement

Courtesy of GENERAL MOTORS CORP.

With an assistant, position the hood hinge to the alignment marks on the vehicle.

NOTE: Refer to Fastener Notice .

Install the hinge to hood bolts.
Tighten: Tighten the hinge to hood bolts to 25 N.m (18 lb ft).
Slowly lower the hood.
Inspect the hood alignment. Align the hood if necessary. Refer to Hood Adjustment .
Install the hood hinge covers.