LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1805 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Side Door Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Door
    GM941645Courtesy of GENERAL MOTORS CORP.
  1. With an assistant position the front door and loosely install all hinge to body bolts.
    2. NOTE: Refer to Fastener Notice .
  2. Align the hinge with the marks made during the removal procedure.

    Tighten:  Tighten the hinge to body bolts to 25 N.m (18 lb ft).

  3. Install the front door check link. Refer to Front Side Door Check Link Replacement .
  4. Engage wiring harness grommet into door and install the front door wiring harness.
  5. Reconnect all wiring harness connectors inside the door.
  6. Verify the door is aligned properly. If door adjustment is required, refer to Front Side Door Adjustment .
  7. Install the front door insulator. Refer to Front Side Door Insulator Replacement .
  8. Install the front door outer panel. Refer to Front Side Door Outer Panel Replacement .
  9. Install the front fender. Refer to Front Fender Replacement .
scientia non olet · About LEMON Manuals