LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1804 (Bumpers And Fascias) >> Repair Instructions >> Rear Bumper Fascia Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear wheelhouse liners. Refer to Rear Wheelhouse Liner Panel Replacement .
    2. Fig 1: View of Fascia Replacement - Rear Bumper
    GM929275Courtesy of GENERAL MOTORS CORP.
  2. Remove the rear fascia to body push-in retainers.
    3. Fig 2: View of Rear Fascia By Reaching Through Wheelhouse Opening
    GM929762Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear fascia from quarter panel by reaching through the wheelhouse opening and pushing the tabs to unlock the rear fascia.
  4. Slide fascia rearward out of the quarter panel brackets to remove from vehicle.
scientia non olet · About LEMON Manuals