Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Fascia Tabs With Outer Quarter Panel Slots

Courtesy of GENERAL MOTORS CORP.

Align fascia tabs with outer quarter panel slots.
Firmly push the rear fascia ends into the quarter panel brackets until secure.

Fig 2: View of Fascia Replacement - Rear Bumper

Courtesy of GENERAL MOTORS CORP.

Install the fascia to body push-in retainers.
Install the rear wheelhouse liners. Refer to Rear Wheelhouse Liner Panel Replacement .