Front Bumper Fascia Support Replacement

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Bumper Fascia Support

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front bumper fascia upper grille. Refer to Front Bumper Upper Fascia Grille Replacement .
1	Hood Stop Bumper Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 3 N.m (27 lb in)
2	Front Fascia Center Support Bolt (Qty: 2) Tighten: 6 N.m (53 lb in)
3	Front Bumper Fascia Center Support