LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1800 (Exterior Trim) >> Repair Instructions >> Rocker Panel Molding Support Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rocker Panel Molding Support
    GM929258Courtesy of GENERAL MOTORS CORP.
  1. Position the rocker panel support to the vehicle.
  2. Install the rocker panel to structure rivets.
  3. Install the rocker panel molding. Refer to Rocker Panel Molding Replacement .
scientia non olet · About LEMON Manuals