Hood Front Molding Replacement
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Hood Front Molding Replacement
| Callout | Component Name |
|---|---|
| Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . | |
| 1 | Integral Retention Clips (Qty: 3) Tip: Secure the clips onto the molding prior to installing the new molding to the hood. |
| 2 | Hood Front Molding Tip: Pull forward in order to release the three integral retainer clips from the hood. |