Action Taken When the DTC Sets
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
When DTC P0504 is set, the following will occur:
- The cruise control is disabled.
- The PCM will function as if the brake pedal is not pressed.
- The control module stores the DTC information into memory when the diagnostic runs and fails.
- The malfunction indicator lamp (MIL) will not illuminate.
- The control module records the operating conditions at the time the diagnostic fails. The control module stores this information in the Failure Records.