LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1798 (Interior Trim And Paneling) >> Repair Instructions >> Rear Upper Garnish Molding Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Upper Garnish Molding
    GM981002Courtesy of GENERAL MOTORS CORP.
  1. Install the rear upper garnish molding to the vehicle.
  2. Push the garnish molding until the fasteners are seated.
  3. Close the lift gate.
scientia non olet · About LEMON Manuals