Console Shift Lever Bezel Replacement

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Console Shift Lever Bezel And Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Console Shift Lever Bezel NOTE: Be sure to follow the service procedure when removing the trim panel. Failure to follow service procedure may cause damage to the trim panel. Tip: Grasp the forward outer edges of the shift bezel and pull outward and upward carefully releasing the locking tabs. At the center forward edge of the trim panel squeeze the locking tabs together releasing the forward edge of the trim bezel from the console assembly. Pull the trim bezel upward releasing the trim bezel from the console assembly. Disconnect the electrical connections. If replacing the shift lever bezel, transfer all necessary components.
2	Retainer Clip (Qty: 4)

Callout

Component Name

Console Shift Lever Bezel

NOTE: Be sure to follow the service procedure when removing the trim panel. Failure to follow service procedure may cause damage to the trim panel.

Tip:

Grasp the forward outer edges of the shift bezel and pull outward and upward carefully releasing the locking tabs.
At the center forward edge of the trim panel squeeze the locking tabs together releasing the forward edge of the trim bezel from the console assembly.
Pull the trim bezel upward releasing the trim bezel from the console assembly.
Disconnect the electrical connections.
If replacing the shift lever bezel, transfer all necessary components.

Retainer Clip (Qty: 4)