LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1795 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Front Seat Lumbar Support Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat back pad and cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (Fold Flat)  or Front Seat Back Cushion Cover and Cushion Pad Replacement (Non-Fold Flat) .
  2. Adjust the lumbar knob until the lumbar is at the position of the least support.
    3. Fig 1: View Of Lumbar Cable End
    GM987766Courtesy of GENERAL MOTORS CORP.
  3. Remove the lumbar cable end from the lumbar unit by compressing the unit while lifting out the barrel end of the cable assembly.
    4. Fig 2: Twisting Upper Portion Of Lumbar Unit
    GM987798Courtesy of GENERAL MOTORS CORP.
  4. Using a flat-bladed tool, twist out the upper portion of the lumbar unit from the seat frame cross wire.
    5. Fig 3: Twisting Lower Portion Of Lumbar Unit
    GM987938Courtesy of GENERAL MOTORS CORP.
  5. Remove the lower portion of the lumbar unit from the seat cross wire.
  6. Remove the lumbar unit.
scientia non olet · About LEMON Manuals