LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1795 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Front Seat Cushion Outer Trim Panel Replacement (2-Way) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Outer Trim Panel & Secure With Trim Panel Screws
    GM981042Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the trim panel and secure with the trim panel screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

    2. Fig 2: View Of Front Seat Back Recliner Trim Panel
    GM981031Courtesy of GENERAL MOTORS CORP.
  2. Position the outboard recliner trim cover on the seat and secure with the trim cover screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  3. Install the front seat. Refer to Front Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals