LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1795 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Driver Seat Recliner Actuator Cable and Passenger Seat Recliner Actuator Cable Replacement (Fold Flat) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat from the vehicle. Refer to Front Seat Replacement - Bucket .
  2. Remove the seat cushion cover/pad assembly. Refer to Front Seat Cushion Cover and Pad Replacement .
    3. Fig 1: Removing/Installing Seat Recliner Cable
    GM987135Courtesy of GENERAL MOTORS CORP.
  3. Using a small flat-bladed tool pry the seat recliner cable from the inner recliner cable clip.
  4. Remove the seat recliner cable from the outer recliner mechanism.
scientia non olet · About LEMON Manuals