LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1795 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Driver Seat Recliner Actuator Cable and Passenger Seat Recliner Actuator Cable Replacement (Fold Flat) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Disconnecting/Connecting Outboard End Of The Fold-Flat Cable
    GM987228Courtesy of GENERAL MOTORS CORP.
  1. Install the seat recliner cable mechanism into the outer recliner mechanism.
  2. Snap the recliner cable into the inner recliner mechanism.
    3. Fig 2: Removing/Installing Seat Recliner Cable
    GM987135Courtesy of GENERAL MOTORS CORP.
  3. Remove the slack from the recliner cable by turning the threaded end of the cable in the clip.
  4. Install the seat cushion cover/pad assembly. Refer to Front Seat Cushion Cover and Pad Replacement .
  5. Install the seat into the vehicle. Refer to Front Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals