Rear Brake Caliper: Removal
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 1999 Oldsmobile Bravada, 1999 GMC Sonoma, 1999 GMC Jimmy, 1999 GMC Envoy, and 1999 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Remove 2/3 of brake fluid from master cylinder reservoir. Raise and support vehicle. Remove wheel. Using "C" clamp, compress caliper piston until it bottoms out in its bore.
- Remove brake hose from caliper. Remove caliper guide pin bolts. Remove caliper from caliper anchor bracket.