LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1790 (Frame & Underbody) >> Repair Instructions >> Frame Brace Replacement (Trailblazer, Envoy, Bravada) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the frame brace to the frame using the 2 mounting bolts.

    Tighten 

    Tighten the bolts to 45 N.m (33 lb.ft).

  2. Lower the vehicle.
    Fig 1: Installing Frame Brace To Frame Using Mounting Bolts
    G03571240Courtesy of GENERAL MOTORS CORP.