LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1790 (Frame & Underbody) >> Repair Instructions >> Frame Brace Replacement (Trailblazer EXT, Envoy XL) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the frame brace (1) to the frame using the mounting bolts (2).

    Tighten 

    Tighten the bolts to 45 N.m (33 lb.ft).

  2. Lower the vehicle.
    Fig 1: Installing Frame Brace To Frame Using Mounting Bolts
    G03571242Courtesy of GENERAL MOTORS CORP.