LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1783 (Engine Exhaust System) >> Repair Instructions >> Exhaust Hanger Replacement (6.6L Engine with RPO YF2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Remove the exhaust muffler hanger nuts.
  3. Remove the hanger from the hanger insulator.
    Fig 1: Removing Exhaust Hanger (6.6L w/RPO YF2)
    G02133605Courtesy of GENERAL MOTORS CORP.