LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1781 (Automatic Transmission Overhaul - 4 Speed-Mu4) >> Repair Instructions >> Second Coast Brake Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the following components onto the 2nd coast brake piston rod (1):
    • The 2nd coast brake inner return spring seat (2)
    • The 2nd coast brake inner return spring (3)
  2. Install the 2nd coast brake servo piston rod into the 2nd coast brake piston (4). Secure the servo piston rod with one O-ring.
  3. Install the new 2nd coast brake piston seal onto the 2nd coast brake piston.
  4. Install the 2 new 2nd coast brake servo cover seals onto the 2nd coast brake servo cover.
    Fig 1: View Of 2nd Coast Inner Return Spring, Seat, Brake Servo Cover & 2nd Coast Brake Piston
    G01384854Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals