LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1781 (Automatic Transmission Overhaul - 4 Speed-Mu4) >> Repair Instructions >> First Reverse Brake Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the two 1st- reverse brake piston seals from the 1st- reverse brake piston.
  2. Clean all the 1st- reverse brake components and dry thoroughly.
  3. Inspect the 1st- reverse brake discs for excessive wear or damage and replace as necessary.
  4. Inspect the 1st - reverse brake piston for cracks or porosity and replace as necessary.
  5. Inspect the 1st - reverse brake piston return spring for distortion or weakness and replace as necessary.
scientia non olet · About LEMON Manuals