LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1776 (Engine Cooling System) >> Repair Instructions >> Radiator Vent Inlet Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the vent inlet hose to the surge tank.
  2. Install the vent inlet hose to the radiator.
  3. Install the upper radiator baffle. Refer to AIR INTAKE BAFFLE REPLACEMENT - RADIATOR in Body Front End.
  4. Fill the cooling system. Refer to Draining and Filling Cooling System .
scientia non olet · About LEMON Manuals