LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1776 (Engine Cooling System) >> Repair Instructions >> Radiator Hose Replacement - Outlet (Body VIN Code 3) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the inlet radiator hose clamps (1, 2) to the radiator hose.
  2. Install the inlet radiator hose to the engine.
  3. Reposition the inlet radiator hose clamp (1) using J 38185  .
    Fig 1: View Of Radiator Hose Clamps
    GM753673Courtesy of GENERAL MOTORS CORP.
  4. Install the inlet radiator hose to the radiator.
  5. Reposition the inlet radiator hose clamp (2) using J 38185  .
  6. Fill the cooling system. Refer to Draining and Filling Cooling System .
scientia non olet · About LEMON Manuals