LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1776 (Engine Cooling System) >> Repair Instructions >> Fan Clutch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cooling fan and shroud. Refer to Cooling Fan and Shroud Replacement .
  2. Remove the push-pin and release the fan clutch electrical connector from the fan shroud.
  3. Remove the fan clutch from the fan shroud.
  4. Remove the bolts retaining the fan blade to the fan clutch.
    Fig 1: View Of Fan Blade & Fan Clutch
    GM721992Courtesy of GENERAL MOTORS CORP.
  5. Separate the fan blade from the fan clutch.
scientia non olet · About LEMON Manuals