LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1776 (Engine Cooling System) >> Repair Instructions >> Coolant Recovery Reservoir Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner assembly.
  2. Remove the bracket bolt securing the accumulator to the coolant recovery reservoir (1).
    Fig 1: Removing/Installing Coolant Recovery Reservoir Hoses & Bracket Bolt
    GM769224Courtesy of GENERAL MOTORS CORP.
  3. Move the accumulator out of the way.
  4. Remove the coolant hoses from the coolant recovery reservoir and plug the hoses and the coolant recovery reservoir outlets with suitable plugs (2).
  5. Remove the nut and bolt securing the coolant recovery reservoir.
  6. Remove the coolant recovery reservoir.
scientia non olet · About LEMON Manuals