Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Tow Hook To Impact Bar

Courtesy of GENERAL MOTORS CORP.

Install the tow hook to the impact bar, ensuring that the locating pin is properly indexed to the impact bar.

NOTE: Refer to Fastener Notice in CAUTIONS & NOTICES .

Install the bolt which retains the tow hook to the impact bar.
Tighten: Tighten the bolt to 50 N.m (37 lb ft).
Install the impact bar. Refer to IMPACT BAR REPLACEMENT - FRONT BUMPER .
Install the fascia. Refer to FASCIA REPLACEMENT - FRONT BUMPER (CHEVROLET, GMC) or FASCIA REPLACEMENT - FRONT BUMPER (OLDSMOBILE .
Install the grille. Refer to GRILLE REPLACEMENT (GMC) , GRILLE REPLACEMENT (CHEVROLET) or GRILLE REPLACEMENT (OLDSMOBILE) .