LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1773 (Frame & Underbody) >> Repair Instructions >> Radiator Support Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Radiator Support Shield
    GM769533Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator support shield.
    2. NOTE: Refer to Fastener Notice in CAUTIONS & NOTICES .
  2. Install the radiator support shield mounting nuts and bolts.

    Tighten:  Tighten the radiator support shield mounting nuts to 17 N.m (13 lb ft).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals