LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1773 (Frame & Underbody) >> Repair Instructions >> Frame Cushion or Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the upper cushions (2) to the vehicle.
    Fig 1: View Of Frame Lower Cushions
    GM757746Courtesy of GENERAL MOTORS CORP.
  2. Raise the frame slightly on the hoist.
  3. NOTE: Refer to Fastener Notice in CAUTIONS & NOTICES .
  4. Install the lower cushions, retainers, and bolts to the 5 body mount locations.

    Tighten:  Tighten the bolts to 80 N.m (59 lb ft).

  5. Fig 2: Installing Lower Cushion Retainer And Bolt To Radiator Support
    GM757748Courtesy of GENERAL MOTORS CORP.
  6. Install the lower cushion, retainer, and bolt to the radiator support.

    Tighten:  Tighten the bolts to 80 N.m (59 lb ft).