LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1773 (Frame & Underbody) >> Repair Instructions >> Frame Brace Replacement (Trailblazer, Envoy, Bravada) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Refer to Fastener Notice in CAUTIONS & NOTICES .
    Fig 1: View Of Frame Brace
    GM759221Courtesy of GENERAL MOTORS CORP.
  1. Install the frame brace to the frame using the 2 mounting bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  2. Lower the vehicle.
scientia non olet · About LEMON Manuals