Installation Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the frame brace (1) to the frame using the mounting bolts (2).
Tighten: Tighten the bolts to 50 N.m (37 lb ft).
- Lower the vehicle.
NOTE:
Refer to Fastener Notice in CAUTIONS & NOTICES
.