LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1773 (Frame & Underbody) >> Repair Instructions >> Crossmember Replacement - Front Steering Gear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Remove the engine shield mounting bolts.
    Fig 1: Removing/Installing Engine Shield
    GM687450Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine shield.
  4. Fig 2: Removing Rear Lower Control Arm Bracket To Frame Mounting Bolts
    GM899003Courtesy of GENERAL MOTORS CORP.
  5. Remove the rear lower control arm bracket to frame mounting bolts.
  6. Fig 3: Steering Gear Crossmember Mounting Bolts
    GM687452Courtesy of GENERAL MOTORS CORP.
  7. Remove the steering gear crossmember mounting bolts.
  8. Remove the steering gear crossmember.