LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1773 (Frame & Underbody) >> Repair Instructions >> Assist Step Support Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
    2. Fig 1: Removing Bolts That Retaining Assist Step Support Brackets To Body
    GM743500Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolts that retain the assist step support brackets to the body.
  3. Remove the assist step assembly from the vehicle.
  4. Place the step assembly on a clean, prepared surface.
    5. Fig 2: Assist Step Support Brackets
    GM750777Courtesy of GENERAL MOTORS CORP.
  5. Remove the nuts (1) that retain the assist step to the support brackets.
  6. Remove the support brackets from the assist step.
scientia non olet · About LEMON Manuals