LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1773 (Frame & Underbody) >> Repair Instructions >> Assist Step Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
    2. Fig 1: Assist Step Support Brackets
    GM750777Courtesy of GENERAL MOTORS CORP.
  2. Remove the nuts (1) that retain the assist step to the assist step support brackets.
  3. Remove the assist step from the support brackets.
  4. Place the assist step on a clean, prepared surface.
  5. Release the fasteners (2) that retain the assist step pad to the assist step.
  6. Remove the assist step pad from the assist step.
scientia non olet · About LEMON Manuals