LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1771 (Engine Exhaust) >> Repair Instructions >> Exhaust Heat Shield Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle on the opposite end from which the components are being removed.
  1. Hoist the vehicle.
    2. Fig 1: View Of Hanger From Rubber Isolators
    GM926825Courtesy of GENERAL MOTORS CORP.
  2. Remove the manifold exhaust pipe. Refer to Exhaust Manifold Pipe Replacement (L81)  or Exhaust Manifold Pipe Replacement (L61) .
    3. Fig 2: Positioning Shield Onto Vehicle
    GM927081Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The front and rear heat shields overlap and utilize common rivet attachment points.
  3. Remove the nut and rivets.
  4. Remove the heat shield.
scientia non olet · About LEMON Manuals