LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Automatic Transaxle Servicing) >> Removal & Installation >> Transaxle Mount Assembly (Rear) >> Removal

Transaxle Mount Assembly (Rear): Removal

WARNING: This page is about a different car, the 2003 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle.
  2. Remove the left front wheel.
  3. Remove the front fender liner. See Fig 1 .
  4. Remove the mount-through bolt (1). See Fig 2 .
  5. Remove the mount bolts.
  6. Remove the mount.
Fig 1: Removal & Installing Left Front Fender Liner
G00088342Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Through Bolts
G00088343Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals