LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Automatic Transaxle Servicing) >> Removal & Installation >> Transaxle Mount Assembly (Front) >> Removal

Transaxle Mount Assembly (Front): Removal

WARNING: This page is about a different car, the 2003 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Support the engine with a jackstand and a block of wood.
  3. Remove the mount thru-bolt.
  4. Remove the lower mount bracket bolts and the lower mount bracket.
  5. Remove the front transaxle mount bolts and the front transaxle mount.
scientia non olet · About LEMON Manuals