LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Automatic Transaxle Servicing) >> Removal & Installation >> Low/Reverse Servo Assembly >> Installation

Low/Reverse Servo Assembly: Installation

WARNING: This page is about a different car, the 2003 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble low/reverse servo assembly.
  2. Install the low-reverse band servo and cover. See Figure . Install and tighten the bolts to specification. See TORQUE SPECIFICATIONS  .
  3. Install the oil feed pipe. See OIL FEED PIPES  .
  4. Install the oil filter and pan. See DRAINING & REFILLING  under REMOVAL & INSTALLATION.
  5. Lower the vehicle.
  6. Refill the transaxle with appropriate fluid to proper level. See LUBRICATION  .
scientia non olet · About LEMON Manuals