LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Automatic Transaxle Servicing) >> Lubrication >> Oil Cooler Flushing & Flow Test >> Clean-Up

Oil Cooler Flushing & Flow Test: Clean-Up

WARNING: This page is about a different car, the 2003 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the water supply hose from the transaxle oil cooler and line flusher and bleed any remaining air pressure from the flusher tank.
  2. Remove the fill cap from the transaxle oil cooler and line flusher and return any unused flushing solution to its container. Rinse the transaxle oil cooler and line flusher with water. Do not store the transaxle oil cooler and line flusher with flushing solution in it.
  3. After every third use, clean the transaxle oil cooler and line flusher as described in the instructions included with the tool.
  4. Dispose of any waste water/solution and transaxle fluid in accordance with local regulations.
scientia non olet · About LEMON Manuals