LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1763 (Front Suspension) >> Repair Instructions >> Lower Control Arm Bushings Replacement (Front) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the lower control arm. Refer to Lower Control Arm Replacement .
  4. Place the control arm in a vise or suitable holding device.
  5. Fig 1: Front Control Arm Bushing
    GM932904Courtesy of GENERAL MOTORS CORP.
  6. Use the J 44971  to press out the front control arm bushing. See Special Tools .