Centerline Description: Length
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Centerline length measurements are 3-dimensional measurements. The 3 dimensions are the following:
- Length - The distance between 2 points when the height is parallel to the center plane.
- Height - The measurement is parallel to the datum plane.
- Width - The measurement is parallel to the center plane.
When reading dimension charts, horizontal width and length dimensions of the underbody are shown as viewed from the bottom of the underbody. Vertical dimensions use the datum plane as a base for all vertical (height) measurements.
Centerline measurements are used with universal measuring equipment.