Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Impact Bar

Courtesy of GENERAL MOTORS CORP.

Align the impact bar with the structure.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the impact bar to structure bolts.
Tighten: Tighten the nuts to 25 N.m (18 lb ft).
Install the front bumper energy absorber. Refer to Energy Absorber Replacement - Front .
Install the front bumper fascia. Refer to Fascia Replacement - Front Bumper .