Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Aligning Fascia Tabs With Outer Quarter Panel Slots

Courtesy of GENERAL MOTORS CORP.

Align fascia tabs with outer quarter panel slots.
Firmly push the rear fascia ends into the quarter panel brackets until secure.

Fig 2: Rear Fascia

Courtesy of GENERAL MOTORS CORP.

Install the fascia to body push-in retainers.
Install the rear wheelhouse liners. Refer to Wheelhouse Liner Panel Replacement - Rear in Body Rear End.