LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1760 (Bumpers) >> Repair Instructions >> Fascia Reflector Replacement - Rear Bumper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Fascia Reflector
    GM929262Courtesy of GENERAL MOTORS CORP.
  1. Position the reflector to the rear fascia.
  2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the reflector to fascia nut.

    Tighten:  Tighten the nut to 6 N.m (53 lb in).

  4. Install the rear fascia. Refer to Fascia Replacement - Rear Bumper  .